There are various types of multimeters used for many electric and mechanical work. Each multimeter has its features and characteristics. Listed below are some of the different types of multimeters. These include Autoranging, Digital, Alligator clips, Jumper wires, etc. Read on to discover more about these instruments. Click this to know the multimeter price in UAE.
To check the functioning of various electronic devices, measuring instruments are required. These devices, also known as digital multimeters, display hidden information on their digital displays. There are several types of digital multimeters to choose from. Read on to learn about the differences between them.
Autoranging digital multimeters
The difference between a manual and an auto-ranging digital multimeter is the range of measurement they offer. While manual multimeters require the user to select the range manually, auto-ranging multimeters adjust automatically and indicate the measurement range. These meters are great for circuit boards and sensors. Because resistors are banded, they often require a chart to identify them. Autoranging multimeters make measuring the resistance of any component quick and easy.
Alligator clips for multimeters attach to test probes. These devices have an extra contact on the back of the clip that makes them plug and plays with multimeters and test leads. They have a length of 55mm and a jaw opening of 8mm. The insulators prevent the clip from touching other metals and causing accidental short circuits. Alligator clips are available in many different styles, including pins and female threaded connectors.
You may not be aware that multimeters often use jumper wires to measure voltage and current. These wires are designed with connector pins at each end to connect two points without soldering. These wires are typically used in prototype tools and breadboards because they allow you to switch circuits easily. They also make it easy to insert an in-line fuse holder between your test leads. A five-amp fuse will prevent a dangerous voltage spike and protect your multimeter from any damage that might occur as a result of it.
Most multimeters have a display count, which can vary in the number of digits. A multimeter with a three-half-digit display is a good example of this. A full-digit display can show numbers from 0 to 9, while a two-digit display can show only a single ‘1’. In addition to counting digits, most multimeters also have a “digits-per-six’ setting, which displays a single digit of the measurement.